Exploring the Impact of 3D Printing Technology on Patient-Specific Prosthodontic Rehabilitation: A Comparative Study.

Introduction: The rapid advancement of 3D printing technology has opened new avenues for patient-specific prosthodontic rehabilitation. This study aimed to explore the impact of 3D printing technology on prosthodontic outcomes and patient satisfaction through a comparative analysis. Materials and Methods: A total of 100 patients requiring prosthodontic rehabilitation were recruited for this study. The patients were randomly divided into two groups: the experimental group, where 3D printing technology was utilized for the fabrication of patient-specific prostheses, and the control group, where conventional fabrication techniques were employed. Various parameters were assessed, including prosthesis fit, occlusion, esthetics, and patient-reported outcomes such as comfort and satisfaction. Digital measurements and subjective evaluations were conducted to compare the outcomes between the two groups. Statistical analysis was performed using appropriate tests. Results: Preliminary findings indicated that the use of 3D printing technology in prosthodontic rehabilitation resulted in superior prosthesis fit, enhanced occlusal stability, and improved esthetics compared to conventional methods. Moreover, patients in the experimental group reported higher levels of comfort and overall satisfaction. The advantages of 3D printing technology were observed across different types of prosthodontic restorations, including crowns, bridges, and dentures. These results highlight the potential of 3D printing technology to revolutionize patient-specific prosthodontic rehabilitation. By facilitating precise fabrication, customization, and improved functional outcomes, 3D printing can enhance the overall quality of prosthodontic care. Further long-term studies are warranted to validate these findings and explore the cost-effectiveness and long-term durability of 3D-printed prostheses. Conclusion: In conclusion, this study demonstrates that the integration of 3D printing technology in patient-specific prosthodontic rehabilitation holds great promise for achieving optimal functional and esthetic outcomes. The findings contribute to advancing prosthodontic practices and provide valuable insights for clinicians and researchers seeking to incorporate this innovative technology into their treatment protocols.

Evaluation of the Influence of Nasolabial Angle, Upper Sulcus Depth, and Nasal Tip Protrusion in the Perception of Facial Attractiveness.

Objective: To evaluate the influence of variations in the upper sulcus depth, nasal tip protrusion, and nasolabial angle on the esthetic perception of profiles. Design: A web-based survey study and was conducted in the Department of Orthodontics and Dentofacial Orthopaedics. This survey was conducted for a period of 10 months and included orthodontists practicing in India. Methods: This study included lateral cephalograms of the most esthetic profiles from a set of 30 profiles that were within Holdaways norms; the most esthetic profile was determined by a panel of two orthodontists and two general dentists. The most esthetic profile photograph will be transferred to a computer in Corel software. The outline of the profile will remain the same, with the inner aspect converted into a dark area (black); now, the profile is completely converted into facial silhouettes. This black facial silhouette is presented to avoid any distractions and bias. There will be a total of 27 silhouettes by various combinations of increased, decreased, and normal values for nasolabial angle, upper sulcus depth, and nasal tip protrusions. Results: Both the orthodontist and layman chose the most favored profile as a normal profile having a normal nasal tip, normal nasolabial angle, and normal upper sulcus depth, whereas among dentists, 50% chose the most favored profile in which the nasolabial angle was normal but the nasal tip and upper labial sulcus were decreased. When it comes to the least favored profiles, opinions varied between orthodontists, dentists, and laymen. Conclusion: The perception of facial esthetics has always been and still is varied between the layman, the dentist, and the orthodontists. Profiles with normal to sharp noses with normal and increased nasolabial angles were considered more attractive than the others. Profiles with fuller upper labial sulci were considered least attractive with other parameters changing.

Patient-reported esthetic outcomes following lower extremity free flap reconstruction: A cross-sectional multicenter study.

INTRODUCTION: The goal of lower-extremity reconstructions is primarily to salvage the leg; however, esthetic outcomes are also important. This study aimed to assess the impact of a lower extremity free tissue transfer regarding social functioning, patient-reported esthetic outcomes, and possible differences between fasciocutaneous vs. muscle flaps. MATERIAL AND METHODS: For this cross-sectional multicenter study, patients operated between 2003 and 2021, with a minimum follow-up of 12 months, were identified. Outcomes were obtained from 89 patients. Patient-reported outcomes were assessed using a questionnaire containing 5-point Likert scale questions grouped in three groups: aspect of the reconstructed leg, the aspect of the donor site, and the negative impact on social functioning. Physical functioning and mental health were assessed with the Short-Form-36. RESULTS: The overall score for negative impact on social functioning was 22.2. This was 46.7 for the esthetic satisfaction of the reconstructed leg and 57.1 for the donor site. No significant differences were seen between patients who underwent a reconstruction with a fasciocutaneous flap compared to a muscle flap. Secondary surgical procedures for improving the esthetic aspect were performed in 12% of the patients in the fasciocutaneous group and 0% in the muscle group. CONCLUSION: Our results show that the most optimal esthetic outcome is not defined by the type of flap. We found a strong correlation between physical functioning and the negative impact on social functioning that a reconstructed lower extremity may have. The result of this study can be taken into consideration during the shared decision-making process of choosing the most optimal reconstruction.

Determining the widths of the maxillary anterior teeth for esthetics: comparison of the Mondelli and Albers formulas, esthetic proportion, and golden ratio.

The purpose of this study was to compare various formulas for idealized proportions of the maxillary incisors to the actual dimensions of natural teeth. The Mondelli formula 1 (MF1), Mondelli formula 2 (MF2), Albers formula (AF), esthetic proportion (EP) for width and height of anterior teeth, and golden ratio (GR) were calculated for a total of 50 dental students (30 women and 20 men) who participated in the study. The following measurements were obtained directly in the participant's mouth with a digital caliper: the mesiodistal and incisogingival dimensions of the maxillary central incisors, lateral incisors, and canines; the intercanine distance; and the smile width. The participants were photographed, and the smile width was also measured on the photographs. The MF1 and MF2 were each calculated twice, using both direct measurements and photographic measurements. The projected central incisor widths calculated using the MF1, MF2, and AF were compared among themselves and against the actual measurements using analysis of variance and Fisher test for multiple comparisons (α = 0.05). The EP and GR were analyzed using descriptive statistics. There was a statistically significant difference between all of the widths projected by the formulas and the actual widths of the central incisors (P < 0.05). Whether calculated from a direct or a photographic measurement, the incisor widths projected by the MF1 and MF2 were statistically similar to each other (P > 0.05). The EP values were similar to those reported in the literature. Only 2% of the participants had an incisor width ratio (central incisor/lateral incisor) that matched the GR of 1.618, while 86% fell within the range of 1.2 to 1.4. Overall, the proportions calculated with the MF1, MF2, AF, EP, and GR did not exactly match the actual dimensions of natural teeth. The formulas and the proportions available in the literature can assist in esthetic planning, but the individual characteristics of each patient and expertise of the dentist should guide treatment for each case.

Evaluation of open-face maxillary complete denture for patients with prominent premaxilla: a crossover study.

BACKGROUND: The establishment of good facial esthetics is one of the main objectives of complete denture construction. Unfortunately, it may be the caused issue for patients having a prominent premaxilla due to excessive lip support by the labial flange of the maxillary denture. Open-face dentures (OFD) may suggest suitable prosthetic management for these patients. However, clinical evidence regarding the efficiency of OFD is scarce. METHODS: A total of 38 completely edentulous participants having prominent premaxilla and skeletal class I Angle's classification were enrolled in this study. Each participant received a mandibular complete denture and 2 opposing maxillary dentures; conventional (CD) and open-face (OFD). On the day of denture insertion, the participants were divided into 2 groups; CD-OFD and OFD-CD where CD-OFD group was instructed to use the mandibular denture and the maxillary CD for 3 months and then to use the maxillary OFD for another 3 months after a wash-out period of 2 weeks. While group OFD-CD was instructed to use the mandibular denture and the maxillary OFD for 3 months then to use the maxillary CD for another 3 months after a wash-out period of 2 weeks. The dislodging force of the maxillary dentures was evaluated using the universal testing machine and the patient perception of retention, esthetics, and comfort was evaluated using the Visual Analogue Scale (VAS). Evaluation was carried out 1 day, 1 month, and 3 months after denture insertion. The Student t-test was used to compare the 2 maxillary dentures and the intervals for each denture were compared by using the ANOVA test with repeated measures followed by a Post Hoc test (adjusted Bonferroni) for pairwise comparison. RESULTS: The significance of the obtained results was judged at the 5% level (P value). The dislodging force and patient perception of retention did not show significant differences between the 2 dentures, while the perception of esthetics showed significant differences throughout the follow-up period. Perception of comfort showed an insignificant difference only at the 3-month interval. CONCLUSIONS: Open-face maxillary dentures can be a suitable alternative for patients with prominent premaxilla to achieve satisfactory retention, aesthetics, and comfort.

3-Dimensional Evaluation of Two PNAM Techniques (Modified Grayson & AlignerNAM) on Facial Soft Tissue Morphology: A Randomised Clinical Trial.

OBJECTIVE: Evaluate facial changes after Presurgical Naso-Alveolar Molding (PNAM) in unilateral cleft lip and palate (UCLP) patients treated with Modified Grayson Technique and AlignerNAM (with DynaCleft nasal elevator) using a 3D facial scan. DESIGN: Randomised clinical trial. SETTING: Institutional study. Participants: 20 UCLP patients allocated to two groups (10 patients each). INTERVENTIONS: Group A patients underwent PNAM with Modified Grayson Technique and Group B patients underwent AlignerNAM (with DynaCleft nasal elevator). Their 3D facial scans were obtained by using an iOSbased application (Bellus3D FaceApp) mounted on a novel frame. These .stl files were analysed using 3D software (GOM INSPECT) at three-time intervals; before intervention (T0), after intervention (T1) and one month after lip repair surgery (T2). MAIN OUTCOME MEASURE(S): Changes in facial and nasolabial morphology. RESULTS: Both techniques brought significant improvement in the columellar length, nasal tip projection, columella angle, nasal tip angle and a significant reduction in cleft width. At T1, a statistically significant difference in angular and linear measurements was present in both groups. At T2, no statistically significant difference in linear parameters was observed between the two groups except for the outer lateral height of the non-cleft side, basal lateral height of the non-cleft side, and philtrum width. Similar pattern was observed in angular measurements with no statistically significant difference between the two groups except in nasolabial angle, anterior nasal base triangle III, and anterior nasal root triangle. CONCLUSIONS: Aligner NAM and Modified Grayson technique are equally effective PNAM methods with similar clinical results in nasolabial morphology after lip repair surgery.

Correlation Between Cephalometric Values and Soft Tissue Profile in Class I and Class II Adult Patients based on Vertical Patterns.

Objective: To compare soft tissue profile variations between Class I and Class II adult patients due to three vertical skeletal facial patterns (normodivergent, hypodivergent and hyperdivergent) and determine which skeletal variation has the most significant impact on soft tissue profile. Methods: Retrospective soft tissue profile analysis was performed on lateral cephalograms of 131 adult patients. The analysis was divided into two categories correlated with subnasal and general soft tissue profiles. The sample was divided based on two sagittal skeletal patterns (Class I and II) and three vertical groups. In addition, comparisons were made between males and females. Viewbox 4 was used for the analysis. Descriptive, comparative, and correlation statistics were performed using SPSS software. Results: Statistically significant inter-gender differences were found at the subnasal profile level, but not at the general profile level. No significant differences were observed when comparing subnasal profiles for the sagittal groups. However, significant differences were observed at the level of the general profile, especially at the level of Z-angle, lower lip, and chin prominence. In the vertical groups, hyperdivergent facial patterns had significant differences at the level of subnasal and general profiles compared with other vertical facial patterns. Conclusion: Females had more convex subnasal profiles than males. Hyperdivergent facial patterns had an impact on both general and subnasal soft tissue profiles. The sagittal dimension affected only the general soft tissue profile. Therefore, changes in the vertical dimension had the greatest impact on facial esthetics.

Assessment of the correlation between supracrestal gingival tissue dimensions and other periodontal phenotypes components via the digital registration method: a cross­sectional study in a Chinese population.

BACKGROUND: Supracrestal gingival tissue dimensions (SGTDs) has been considered to be an essential element of periodontal phenotype (PP) components. This study aimed to explore the relationship between SGTDs and other PP components by digital superposition method that integrated cone beam computed tomography (CBCT) with intraoral scanning. METHODS: This cross-sectional study was conducted at the Stomatology Hospital of Fujian Medical University. Participants were recruited based on the inclusion and exclusion criteria. The data obtained from the digital scanner (TRIOS 3, 3Shape, Denmark) and CBCT images were imported into the TRIOS software (Implant Studio, 3Shape, Denmark) for computing relevant parameters. The significant level was set at 0.05. RESULTS: A total of 83 participants with 498 maxillary anterior teeth were finally included. The mean values of supracrestal gingival height (SGH) and the distance from the cementoenamel junction (CEJ) to the crest of the alveolar ridge (CEJ-ABC) on the buccal site were significantly higher than palatal SGH (SGH-p) and palatal CEJ-ABC (CEJ-ABC-p). Men exhibited taller CEJ-ABC and SGH-p than women. Additionally, tooth type was significantly associated with the SGH, SGH-p and CEJ-ABC-p. Taller SGH was associated with wider crown, smaller papilla height (PH), flatter gingival margin, thicker bone thickness (BT) and gingival thickness (GT) at CEJ, the alveolar bone crest (ABC), and 2 mm apical to the ABC. Smaller SGH-p displayed thicker BT and GT at CEJ, the ABC, and 2 and 4 mm apical to the ABC. Higher CEJ-ABC showed lower interproximal bone height, smaller PH, flatter gingival margin, thinner GT and BT at CEJ, and 2 mm apical to the ABC. Smaller CEJ-ABC-p displayed thicker BT at CEJ and 2 and 4 mm apical to the ABC. On the buccal, thicker GT was correlated with thicker BT at 2 and 4 mm below the ABC. CONCLUSION: SGTDs exhibited a correlation with other PP components, especially crown shape, gingival margin and interdental PH. The relationship between SGTDs and gingival and bone phenotypes depended on the apico-coronal level evaluated. TRIAL REGISTRATION: This study was approved by the Biomedical Research Ethics Committee of Stomatology Hospital of Fujian Medical University (approval no. 2023-24).

The "Central Tendency Bias" in the assessment of facial attractiveness in group-based and individual ratings-A survey-based study in 727 volunteers.

BACKGROUND: The increasing number of esthetic procedures emphasizes the need for effective evaluation methods of outcomes. Current practices include the individual practitioners' judgment in conjunction with standardized scales, often relying on the comparison of before and after photographs. This study investigates whether comparative evaluations influence the perception of beauty and aims to enhance the accuracy of esthetic assessments in clinical and research settings. OBJECTIVE: To compare the evaluation of attractiveness and gender characteristics of faces in group-based versus individual ratings. METHODS: A sample of 727 volunteers (average age of 29.5 years) assessed 40 facial photographs (20 male, 20 female) for attractiveness, masculinity, and femininity using a 5-point Likert scale. Each face was digitally edited to display varying ratios in four lip-related proportions: vertical lip position, lip width, upper lip esthetics, and lower lip esthetics. Participants rated these images both in an image series (group-based) and individually. RESULTS: Differences in the perception of the most attractive/masculine/feminine ratios for each lip proportion were found in both the group-based and individual ratings. Group ratings exhibited a significant central tendency bias, with a preference for more average outcomes compared with individual ratings, with an average difference of 0.50 versus 1.00. (p = 0.033) CONCLUSION: A central tendency bias was noted in evaluations of attractiveness, masculinity, and femininity in group-based image presentation, indicating a bias toward more "average" features. Conversely, individual assessments displayed a preference for more pronounced, "non-average" appearances, thereby possibly pointing toward a malleable "intrinsic esthetic blueprint" shaped by comparative context.

Esthetic Rehabilitation of Partially Edentulous Ridge With Horizontal Bone Augmentation Using the Sausage Technique: A Report of Two Cases.

Bone augmentation techniques have been used in atrophic ridges to attain appropriate bone volume and enable dental implant insertion. By reducing the need for autogenous bone and decreasing morbidity at the donor sites, the use of bone substitutes has improved patient comfort and satisfaction. One of the major challenges in implant dentistry is achieving an optimal esthetic result with implant-supported crowns in the esthetic zone. Multiple prosthetic and surgical aspects need to be carefully planned and executed to achieve the final esthetic result. This is a report describing bone augmentation using the sausage technique and subsequent prosthetic rehabilitation in two cases.

A Minimally Invasive Technique for the Management of Physiologic Gingival Melanin Hyperpigmentation: A Case Series.

An attractive smile enhances an individual's self-confidence. The overall harmony of a smile can be attributed to the interplay of the teeth's shape, color, and position along with the gingival tissue. Gingival pigmentation is observed across all human races, exhibiting variations from one race to another. Typically, gingival hyperpigmentation results from the abnormal buildup of melanin in the gingival tissue, imparting a dark appearance on the gums. Various procedures, collectively known as gingival depigmentation, are employed to address gingival hyperpigmentation. While the initial outcomes of depigmentation procedures are often promising, one common issue associated with them is the potential for re-pigmentation. This article aims to evaluate the clinical effectiveness and patient-reported outcomes of intraepidermal (oral mesotherapy) vitamin C injection for nonsurgical management of physiologic gingival melanin hyperpigmentation.

Evaluation of Esthetic Results after Mass Removal with Elliptical Skin Excision Using Ultrasonography to Measure Skin Thickness.

Background: The growth of benign cutaneous masses causes the overlaying skin to expand and become thinner, especially at the central, most projected point. In this retrospective study, a surgical technique comprising an elliptical skin excision was employed to account for these skin changes. Methods: This retrospective study enrolled 980 patients with benign masses. Preoperatively, all patients underwent ultrasonography to evaluate the mass depth and thickness of the attached skin, and mass excision was performed using the elliptical skin-excision method. The operative time was recorded, and complications and esthetic outcomes were assessed using the Cutometer® and the modified Vancouver Scar Scale (mVSS) during 1- and 3-month follow-up visits. Results: The mean operative time (17.48 ± 3.46 min) was significantly shorter than that of conventional methods (p < 0.05). Cutometer parameters showed no significant differences from those of intact skin. The average mVSS scores were 5.21 ± 1.42 and 3.50 ± 1.79 at 1- and 3-month follow-ups, respectively. Conclusions: Mass excision with an elliptical skin attachment resulted in improved esthetic results and easy removal. The attached skin enabled convenient handling without damaging the capsule or other adjacent structures, leaving a thick dermis on both wound edges. Thus, this technique resulted in minimal scarring.

Non-sleep related outcomes of maxillomandibular advancement, a systematic review.

Maxillomandibular advancement has been shown to be an effective treatment for obstructive sleep apnea; however, the literature focuses mainly on sleep-related parameters such as apnea-hypopnea index, respiratory disturbance index and Epworth sleepiness scale. Other factors that may be important to patients, such as esthetics, patient satisfaction, nasality, swallowing problems and so forth have been reported in the literature but have not been systematically studied. Together with an information specialist, an extensive search in Medline, Embase and Scopus yielded 1592 unique articles. Titles and abstracts were screened by two blinded reviewers. In total, 75 articles were deemed eligible for full-text screening and 38 articles were included for qualitative synthesis. The most common categories of non-sleep related outcomes found were surgical accuracy, facial esthetics, functional outcomes, quality of life, patient satisfaction, and emotional health. All categories were reported using heterogenous methods, such that meta-analysis could not be performed. There was lack of consistent methods to assess these outcomes. This work is the first to systematically review non-sleep related outcomes of maxillomandibular advancement. Despite growing interest in evaluating surgical outcomes through patient subjective experiences, this review points to the need of standardized, validated methods to report these outcomes.

The Influence of a Single Infrapositioned Anterior Ankylosed Tooth or Implant Supported Restoration In Smile Attractiveness.

OBJECTIVES: To investigate the influence of a single infrapositioned ankylosed tooth or implant supported restoration, in smile attractiveness. MATERIAL AND METHODS: A series of 48 digital modified images, simulating a varying degree of infraposition(from 0.25 to 2.0 mm, with a step of 0.25 mm), was created for each one of the maxillary anterior tooth, by altering the full-portrait image of a smiling male adult, in medium and high smile lines. For the model with the high smile line, also a series of 24 digital modified images simulating infraposition of a single anterior tooth with a restored incisal edge was created. Smile attractiveness for each one of the images was evaluated from 160 participants (80 dentists and 80 laypersons), implementing a visual analog scale. RESULTS: For the images with the high smile line, an infraposition ≥ 0.25mm in central incisor's region and ≥ 0.5mm in the region of the lateral incisor or the canine, had a negative effect on the perceived smile attractiveness both for the dentists and the laypersons. Regarding the medium smile line, an infraposition ≥ 0.5mm in central and lateral incisor's region, had a negative effect on the perceived smile attractiveness for both groups of observers. In the area of the canine, infraposition ≥ 0.5mm for the dentists and ≥ 0.75mm for the laypersons, had a negative impact on the smile attractiveness. CONCLUSIONS: Even a minor infraposition of a single maxillary anterior ankylosed tooth or implant supported restoration, can reduce the perceived attractiveness of the face. Infraposition in canine's area can be better tolerated in a medium, compared to a high smile line. In patients with a high smile line prosthetic intervention in order to restore the incisal edge of an infrapositioned tooth, without to harmonize the gingival contour, can be beneficial for the lateral incisor, ineffective for the central incisor and unfavorable for the canine.

Profilometric, esthetic, and patient-reported outcomes of the L-shape technique combined with delayed connective tissue grafting in the maxillary anterior region: A 3-year case series study.

OBJECTIVE: To evaluate the profilometric, esthetic, and patient-reported outcomes of peri-implant tissues in the maxillary anterior esthetic zone following guided bone regeneration (GBR) using the L-shape technique combined with delayed connective tissue grafting (CTG). MATERIALS AND METHODS: Profilometric and pink esthetic score (PES) measurements were performed at the time of implant surgery with GBR (T0) and at the 1- (T1), 2- (T2), and 3-year (T3) follow-up. Patient-reported outcomes were also assessed using the Oral Health Impact Profile-14 (OHIP-14) questionnaire. Statistical analysis over 3 years of follow-up assessed changes at time points (T0, T1, T2, and T3) and time periods (T0-T1, T0-T2, and T0-T3) using the Wilcoxon signed-rank test. RESULTS: A total of 12 patients (57.5 ± 12.3 years) were included in this study. The mean profilometric change in peri-implant tissues over the 3-year follow-up period was 3.49 ± 1.11 mm, and the buccal contours were not significantly different between the comparison periods. The PES remained stable, while all OHIP-14 domain scores improved significantly. CONCLUSION: Simultaneous implant placement and GBR using the L-shape technique combined with delayed CTG in the maxillary anterior region provides stable buccal profiles and consistent esthetics and improves patient-reported quality of life over a 3-year period. CLINICAL SIGNIFICANCE: This study demonstrated that GBR using the L-shape technique combined with delayed CTG in the maxillary anterior region improved the buccal profile, esthetics, and patient-reported quality of life.

The Long-Term Esthetic and Radiographic Outcome of Implants Placed in the Anterior Maxilla after Ridge Preservation, Combining Bovine Xenograft with Collagen Matrix.

The objective of the study was to evaluate the long-term esthetic and radiographic results of implants placed in the anterior maxilla after ridge preservation, combining bovine xenograft with collagen matrix. Fifteen patients who required a single tooth extraction because of fracture, root resorption, or extended caries were included in the study. After extraction, all sites were grafted using Deproteinized Bovine Bone Mineral (DBBM) with collagen and covered by a resorbable collagen matrix (CM). Five months after socket grafting, implants were successfully installed. The implant diameter range was between 3.8 and 4.2 mm. All patients were monitored for over 7 years, both clinically and radiographically. Three independent observers evaluated the long-term esthetic outcome, employing the Pink Esthetic Score (PES) technique. Over a period exceeding seven years, a 100% survival rate was observed for all 15 implants, with minimal marginal bone loss. The mean PES was 11.40 (±1.44) at the first assessment and 11.38 (±1.63) at the second assessment. The difference was not statistically significant (p = 0.978), and the scores of PES measurements indicated excellent esthetic results even after seven years. Based on these preliminary results, it seems that placing collagen bovine bone in a fresh extraction socket, covered with a collagen matrix, can preserve the alveolar ridge and provide long-term stable esthetic results.

Comparison of different digital shade selection methodologies in terms of accuracy.

PURPOSE: This study aims to evaluate the accuracy of different shade selection techniques and determine the matching success of crown restorations fabricated using digital shade selection techniques. MATERIALS AND METHODS: Teeth numbers 11 and 21 were prepared on a typodont model. For the #11 tooth, six different crowns were fabricated with randomly selected colors and set as the target crowns. The following four test groups were established: Group C, where the visual shade selection was performed using the Vita 3D Master Shade Guide and the group served as the control; Group Ph, where the shade selection was performed under the guidance of dental photography; Group S, where the shade selection was performed by measuring the target tooth color using a spectrophotometer; and Group I, where the shade selection was performed by scanning the test specimens and target crowns using an intraoral scanner. Based on the test groups, 24 crowns were fabricated using different shade selection techniques. The ΔE values were calculated according to the CIEDE2000 (2:1:1) formula. The collected data were analyzed by means of a one-way analysis of variance. RESULTS: For the four test groups (Groups C, Ph, S, and I), the following mean ΔE values were obtained: 2.74, 3.62, 2.13, and 3.5, respectively. No significant differences were found among the test groups. CONCLUSION: Although there was no statistically significant difference among the shade selection techniques, Group S had relatively lower ΔE values. Moreover, according to the test results, the spectrophotometer shade selection technique may provide more successful clinical results.

Management of interdental papillary defects using subperiosteal hyaluronic acid injection overlay technique: a prospective longitudinal clinical study.

OBJECTIVE: Currently, there is no established treatment protocol to treat interdental papillary loss. This research aimed to evaluate the outcomes of interdental papillary reconstruction using minimally invasive surgery, with injectable hyaluronic acid gel. METHOD AND MATERIALS: Seventeen patients were included, each with five sites of class 1 papillary recession (40 sites in the maxilla and 45 sites in the mandible). Subperiosteal tunneling was performed through a horizontal incision made apical to the base of the papilla without penetrating it. The free gingival sulcus was sealed by 000 retraction cord. A total of 0.2 to 0.6 mL hyaluronic acid was injected gradually. The incision was sutured with polyglycolic sutures. Treated sites underwent clinical and digital evaluation at three follow-up time points (1 month, 3 months, and 6 months). RESULTS: The interdental papillary defect height in the maxillary sites significantly reduced by 60%, 66%, and 42% at 1, 3, and 6 months, respectively. In mandibular sites, the reduction was 54%, 55%, and 40% at the same follow-up time points. Regarding interdental papillary defect surface area in the maxilla, the reduction was 65%, 71%, and 45% at 1, 3, and 6 months. In the mandible, a reduction of 60%, 64%, and 48% was noticed at the same time points. Regarding patients' pain level score, during the day of surgery, 16 patients reported pain; the average pain score out of 10 was 3.94, and 11 patients (64.7%) needed to take analgesics. The pain generally subsided in the following days. At the day of treatment, 12 out of the 17 patients (70.6%) reported mild difficulty in speaking and eating. No complication, hypersensitivity, or allergy was noted in any patient. CONCLUSION: Subperiosteal tunneling with hyaluronic acid injection demonstrates clinical improvements in papilla height and papillary recession surface area reduction after 3 months of follow-up, with reduction in improvement after 6 months. CLINICAL SIGNIFICANCE: Adjunctive use of hyaluronic acid injection with minimally invasive surgery in interdental papillary management may improve clinical and esthetic outcomes.

Functional and esthetic outcomes of virtual surgical planning versus the conventional technique in mandibular reconstruction with a free fibula flap: A retrospective study of 24 cases.

This study aimed to compare the functional and esthetic results in patients following mandibular reconstruction with a free fibula flap (FFF) by virtual surgical planning (VSP) versus the conventional technique. Patients who had undergone mandibular reconstruction with a FFF by VSP or the conventional technique were retrospectively assessed. The two groups were compared regarding functional and esthetic variables with appropriate scales preoperatively, intraoperatively, and postoperatively. Twenty-four patients were evaluated in two groups: conventional (n = 8) and VSP (n = 16). The mean amount of mandibular asymmetry was 2.62 mm (SD = 1.59) in the conventional group and 1.19 mm (SD = 1.32) in the VSP group. Of the patients who underwent conventional surgery, 12.5% had mandibular asymmetry of <2 mm and 87.5% had asymmetry of 2-5 mm. Of the VSP patients, 61.5% had mandibular asymmetry of <2 mm and 38.5% had mandibular asymmetry of 2-5 mm (p = 0.03). The mean difference in size of mandibular angle on the surgical and control sides was not significantly different between the two groups (p = 0.62). The difference in mean length of the mandibular body on the surgical side relative to the control side was not significant between the two groups (p = 0.75). Differences in functional variables between the two groups were not significant. Within the limitation of the study, it seems that the VSP technique resulted in better facial symmetry and superior esthetic outcomes compared with the conventional technique.

Effect of various staining beverages on the color stability of CAD/CAM PMMA denture teeth: An in vitro study.

OBJECTIVE: This study aimed to compare the color change of computer-aided design (CAD)/computer-aided manufacturing (CAM) polymethyl methacrylate (PMMA) denture teeth and conventional acrylic teeth after immersion in three staining beverages (coffee, red tea, and cola) for a day, 7 days, and 30 days. MATERIALS AND METHODS: Group 1: Conventional acrylic teeth (n = 32). Group 2: Milled CAD/CAM teeth out of PMMA disc (n = 32). The specimens of each material were further divided into four subgroups: (1) Control group, distilled water (n = 16). (2) Red tea solution (n = 16). (3) Coffee solution (n = 16). (4) Cola (n = 16). The color change ( ∆ E $\unicode{x02206}E$ ) was assessed using a spectrophotometer at four time points: at the baseline (t0 ), on the 1st day (t1 ), on the 7th day (t2 ), and the 30th day (t3 ) of immersion. Kolmogorov-Smirnov test was applied, followed by performing independent samples t test, one-way analysis of variance and post-hoc Tukey tests to compare the color change values at different time points. RESULTS: The mean score of NBS values of the coffee solution indicates perceivable color change at the end of the 30th day in the conventional acrylic teeth group. It was 0.843 ± 0.395 at t1 , then increased to 1.017 ± 0.477 at t2 and to 2.259 ± 1.059 at t3 . There is a statistically significant difference (p < 0.05) in color change values between both tooth types at the end of the 30th day of immersion in red tea solution and a statistically significant difference at the end of the 7th day (p < 0.05) and the 30th day (p < 0.05) of immersion in coffee solution. CONCLUSIONS: CAD/CAM PMMA teeth are more color stable than conventional acrylic teeth after 30 days of immersion in coffee and red tea solution.